CRL Tremco .200" Wedge Gasket Glazing Spline

70 Durometer Extruded EPDM

Use in Compression Glazing Systems with Tremco POLYshim II Glazing Tapes.

This CRL Tremco Wedge Gasket Glazing Spline profile is made of extruded 70 durometer dense EPDM wedge profiles designed for use in compression glazing systems with Tremco POLYshim II Glazing Tapes.

Face Clearance: .200 in (5.08 mm)

Roll Length:         500 ft

Additional Product Information:

Glazing Spline profiles require a .090 by .062 inch (2.29 by 1.58 millimeter) metal nib for proper engagement. Glazing Spline profiles are ordered and identified by their finished face clearance. 

Important Note:

Special Requirements:

A mock-up is recommended by Tremco to verify acceptable mating between both the Glazing Spline and the Metal Nib.