High Viscosity
Sag Resistant
CRL Titan T660 Fast Cure Urethane is a
high viscosity one-part urethane developed to be used without the aid of tapes.
The heavy body formula is sag resistant and maintains any bead shape. It
delivers fast curing, high psi strength, and excellent adhesion to urethane,
metal and glass. Air and vehicle surface temperatures should exceed 40ºF (5ºC)
during application. In order to meet manufacturer's standards you must use T603A
Glass Primer and W1P40 Pinchweld Primer as needed.
Tensile Strength: 700 psi
Lap Shear Strength: 500 psi
Elongation at Break: N/A
Case Qty: 10
Minimum Order: 12 Each
For the best possible installation, we recommend
you always follow the CRL Urethane preparation sequence: Use PWR22 Automotive
Glass Cleaner on the bonding area of the glass to remove any contamination.
Prime the frit and/or molding with GP60 Glass and Molding Primer and prime any
bare metal scratches with W1P40 Pinchweld Primer. Do not apply to old urethane.
By using all of these products, the strongest possible bond will be attained.
Sold by the cartridge