Excellent Bond on
Short and Full Cut-Out Installations
CRL Titan T380 Urethane provides a safe,
strong bond and is designed for full or close cut-out windshield and backlite
installations. It is easy to gun without sagging. It is also easy to apply and
can be water tested immediately. In order to ensure the manufacturer's
staandards are met, T603A Glass Primer and W1P40 Pinchweld Primer must be used
Tensile Strength: 700 psi
Lap Shear Strength: 500 psi
Elongation at Break: N/A
Case Qty: 12
Minimum Order: 12 Each
For the best possible installation, we recommend
you always follow the CRL Urethane preparation sequence: Use PWR22 Automotive
Glass Cleaner on the bonding area of the glass to remove any contamination.
Prime the frit and/or molding with GP60 Glass and Molding Primer and prime any
bare metal scratches with W1P40 Pinchweld Primer. Do not apply to old urethane.
By using all of these products, the strongest possible bond will be attained.
Sold by the cartridge and packaged 12 to a case.