Allows the Screen Frame to be Held Firmly and Squarely in Place While Installing Screen Wire
The CRL Screen Table Jig Set makes fabricating window screens easier because it keeps the screen frame square and in proper alignment while you roll in the screen wire and retainer spline. It can be used on any shop table, and sets up quickly and easily.
Includes Five Extruded Aluminum Bars and 12 Jig Clips for 3/4" Screen Frame
Minimum Order: 1 Each
The set has five extruded aluminum jig bars in lengths from 28 to 84 inches (71.1 to 213.3 centimeters). The bars are drilled should you want to permanently mount the two longer bars on the corner of the table. The other bars remain unmounted so you can move them to accommodate screens of any size. Also included are 12 extruded aluminum jig clips that slip over the bars along the four sides of the screen. These clips secure your screen frame to the bars while you roll in the screen wire and the retainer spline, and are infinitely adjustable so you can change between screen sizes in just seconds. Additional Jig Clips for 3/4 or one inch (19.1 or 25.4 millimeter) frame are available in sets of four.
Best yet, the whole set ships economically via UPS. There's no reason why you shouldn't have one of these time and labor saving Jig Sets for your screen table.