For 5/16" to 1/2"
(8 to 12 mm) Glass
CRL Roman Series Fixed Panel U-Clamps are
used to secure fixed panels of glass to walls, floors, and ceilings. The rounded
corners give the clamp a "softer" design and creates a classy look. One mounting
screw per clamp is included. They perform the same function as our Standard
Fixed Panel U-Clamps. They are especially recommended for 1/2 inch (12
millimeter) thick glass installations where a hole drilling measurement of 1-1/2
inches (38.1 millimeters) times the glass thickness (from the edge of the glass
to the closest edge of the hole) is required by the temperer.
Color: Satin Nickel
Width: 1-3/4 in (44.5 mm)
Height: 1-15/16 in (49.2 mm)
Minimum Order: 1 Each
Additional Product Information:
The stud that goes through the hole made in the glass is positioned further from
the edge of the glass than that of the Standard U-Clamp. This makes the
Oversized U-Clamp the preferred clamp of most temperers for 1/2 in (12
millimeter) thick glass.
Material: Solid Brass
Glass Thickness Range: 5/16 to 1/2 Inch (8 to 12 millimeter)
Hole Diameter Required: 5/8 or 3/4 Inch (16 or 19 millimeter) Each Panel
Includes: Gaskets and Mounting Screws
Note: An Additional Set of Gaskets is Required for 5/16 Inch (7.9 millimeter)