Used to Fabricate Custom Size Cases, Cabinets and Pass-Through Assemblies
Mounts Into Cut-Out
12' (3.66 m) Stock Lengths
This CRL Standard Pocket Glaze Extrusion has a 3/4 inch (19 millimeter)
high leg on one side for mounting to the wall and is designed to project into
the opening 1-3/16 inch (30 millimeter). If the corners are miter cut, the same
extrusion can be utilized to fully frame the cut-out. Use D601 Rails, D610 Shoe
and D649 Rollers to complete the assembly.
Color: Satin Anodized
Length: 12 ft (3.66 m)
Thickness: .050 in (1.27 mm)
Minimum Order: 1 Stock Lengths (12 ft)