C.R. Laurence CRL POWR 300 Series Primerless-to-Glass Medium Viscosity Urethane - Case of 24


View larger image Printer friendly

Part Number:

PP302MV

Our Price:

$243.84

In stock

Quantity

* To see your shipping charges click "View Cart" after adding your item to the shopping cart.

Product Details:

Primerless-to-Glass Formula
Excellent High Strength and Rapid Curing
Passes or Exceeds F.M.V.S.S. 208/212/216

CRL 300 Series Primerless-to-Glass Medium Viscosity Urethane is a high quality adhesive that passes or exceeds the requirements of U.S. Federal Motor Vehicle Safety Standards 208, 212, 216 and OEM specifications. With over 1,000 psi of tensile strength and 550 psi lap shear at ultimate cure, PP302MV is one of the safest and strongest urethanes offered for the aftermarket. These urethanes have a new Aggressive Adhesion Formula and have proven themselves to aggressively bond to all automotive glass surfaces and frits without needing a glass primer. Long term exposure testing confirms that the new formula stands up to the harshest environmental conditions.

Tensile Strength: 1,000 psi
Lap Shear Strength: 550 psi

Case Qty: 24
Minimum Order: 1 Each

The POWR 300 Series is also formulated without isocyanates. As a result, this new formulation produces a by-product of H2O in the curing process, accelerating the curing process and providing faster safe drive times.

In addition to these features, the POWR 300 Series Urethanes have new wide mouth cartridges that provide a 60% larger nozzle opening than standard cartridges, enabling an increase flow of the material with less force. Reengineered nozzles supplied with the POWR 300 Series Urethanes are designed for easy trimming to accommodate back filling operations or trimmed further to produce a full round bead. The V-Notch indentation can be used as a guide for trimming the nozzle for the proper urethane bead dispensing height.

We are also introducing additional support products for this new series of automotive Urethanes, including CRL POWR 300 Series Urethane EPDM/PVC Primer/UV Blocker PP3UV for bonding to encapsulated parts and moldings or adding a black-out band to glass without a frit to protect the bond line from ultraviolet light. CRL POWR 300 Series Urethane Pinchweld Primer PP3MP is for application prior to bonding to bare metal scratches and rust repaired or repainted pinchwelds. You should always use PWR22 CRL Automotive Glass Cleaner to clean the glass and the bonding area of the glass to remove any contamination. By using these products, the strongest possible bond will be attained. Complete detailed instructions are printed on every cartridge.


	Hours of cure to reach
50 P.S.I.

	
Temperature 
	90% RH 
	75% RH 
	50% RH 
	25% RH

		85°F (29°C) 
		2 2 
		2 3

		70°F (21°C) 
		2 2 
		3 4

		55°F (13°C) 
		4 4 
		5 6

		40°F (4°C) 
		6 6 
		7 9

	RH = Relative Humidity 
	Hours of cure to reach
150 P.S.I.

	
Temperature 
	90% RH 
	75% RH 
	50% RH 
	25% RH

		85°F (29°C) 
		4 5 
		5 8

		70°F (21°C) 
		5 5 
		5 8

		55°F (13°C) 
		10 10 
		11 12

		40°F (4°C) 
		12 15 
		18 18

	RH = Relative Humidity

This Cure Rate Chart is provided as a guideline only. The automotive glass replacement industry has determined the following strengths meet the minimum requirements for safe drive times, 50 p.s.i for FMVSS 212 and 216, and 150 p.s.i for FMVSS 208. Cure rates are dependant upon numerous factors and conditions and your results may vary from these estimated times.

PP302MV is packed 24-10.5 ounce (311 milliliter) cartridges to a case which contains two, twelve pack boxes. Full pallets contain 1,440 total cartridges.