Automatically Closes Most Sizes of Sliding Screen Doors
Fully Adjustable Closing Speed
Complete with Ball Bearing Bottom Rollers and Top Roller Guides
The CRL "Kelly Klozer" for Sliding Screen Doors will operate on right or left
handed closing doors up to 60 inches (152.4 centimeters) wide. A durable spring
and pneumatic mechanism allows the door to open fully and easily on supplied
ball bearing bottom rollers and top roller guides.
Closing speed is controlled by means of a spring-tensioned adjustment valve.
Installation requires two screws on the closer unit and two screws for the
The closer can be mounted horizontally above the door, vertically adjacent to
the jamb, or on the door itself.
Closer mounts above the screen door with two
screws into the wall, and includes a bracket that attaches to the screen door
with two additional crews, all supplied. Die cast end caps, and a ball bearing
pulley wheel give smooth operation. End cap has air reliever screw to adjust
For existing doors that do not roll freely, two 1-1/4" (122 mm) diameter concave
roller bearings are included in the kit, as well as a top guide. Not all
doors are design to use these parts. New original equipment rollers may need to
be installed to make door roll properly.
Color: Powder Coated Bronze
Diameter: 1 in (25 mm)
Length: 61 in (1.5 m)
UPS: Oversize Weight. (over 60 in long)