For 3/8" or 1/2" (10 or 12 mm) Glass
The CRL Sidelite Mounted Transom Patch is used to support a transom from
a sidelite glass panel. It comes with a INT300 Insert for mounting a door with
the CRL PH20A or PH21A Top Door Patch Fitting. The Insert can also be moved on
the non-hinged side, allowing for a double swing door. A INT306 Transom Patch
Door Stop Insert can be used to create a one way door. Also, a INT305 Transom
Patch Keeper Insert can be installed for use with an AMR205 Lock when used for
top of the door installation.
Color: Polished Stainless
Minimum Order: 1 Each
Additional Product Information:
Glass Fabrication Required: One 3/4 inch (19 millimeter) Diameter Hole and
If the weight of the transom exceeds 100 pounds (45.4 kilograms) the transom
must be supported from the ceiling. This is to prevent the Patches from slipping
from too much weight.