
For 3/8" or 1/2" (10 or 12 mm) Glass
The CRL Bottom Door Patch Fitting includes the No. 1NT302 Insert for use
with tapered square style spindle Casma Floor Closers or 1NT404 Free Swing
Pivots. Finished covers are available in four standard finishes. Gaskets are
supplied that allow this Patch Fitting to be used with either 3/8 or 1/2 inch
(10 or 12 millimeter) Glass.
Color: Polished Brass
Minimum Order: 1 Each
Additional Product Information:
Glass Fabrication Required: One 3/4 inch (19 millimeter) diameter hole and
corner notch.
Important Note:
THE FOLLOWING GUIDELINES ARE TO BE USED WHEN MAKING A DOOR USING THIS HARDWARE:
MAXIMUM HEIGHT: 108" (2744MM)
MAXIMUM WEIGHT: 176 LBS (80KG)
MAXIMUM WIDTH: 43" (1100MM)
IF THE DOOR EXCEEDS ANY OF THESE LIMITATIONS FULL DOOR RAILS SHOULD BE USED.