Easy to Use with No Mess or Waste
Instant Grab with No Curing Time Before Hanging Mirror
Perfect for Small Mirror Installations Such as Bathroom Vanity Mirrors
CRL Mirror-Tite Mastic Dots are a new and innovative adhesive system for
mirror installations. Easy to use, simply remove dots from box, apply to wall,
remove release paper and install mirror. Mirror-Tite Mastic Dots immediately
grab the mirror and substrate. No need to wait for curing times of typical
mastics. Primarily designed for bathroom vanity mirrors which do not exceed 36
inches (914 millimeters) in height. Mastic Dots are black in color.
Dot Diameter : 3 in (76 mm)
Dot Thickness: 3/16 in (4.76 mm)
Minimum Order: 1 Case (150 Dots)
Additional Product Information:
CRL Mirror-Tite Mastic Dots provide excellent adhesion to a variety of
substrates including: glass, mirror, acrylic mirror, mirror safety backing,
ceramic tile, aluminumaluminium, painted surfaces and wood. The dots remain
flexible, yet hold firmly as they absorb any movement for the life of the
application. CRL Mirror-Tite Mastic Dots will not get brittle with age or
desilver electro-copper plated or acrylic mirrors. Saves time because there's no
need for caulking guns, electric scoops or adhesive sticks. And no waste from
unused material left in caulking tubes or mastic cans that becomes brittle or
hard. CRL Mirro-Tite Mastic Dots are environmentally safe as they contain no
VOCs.
CRL Mirror-Tite Mastic Dots should be applied one dot per square foot.
Install dots on wall. If extra thickness is needed to bridge irregularities,
simply stack dots to desired height. A mechanical support system is needed and
pressure must be used when setting the mirror. If a mirror needs to be removed,
heat the surface of the mirror to 140° F (60°C) and pull from the wall with
suction cups.
150 dots per case.