Includes Both Countersunk and Cap Fittings
Allows 1/8" (3.2 mm) Vertical Adjustment
Two CRL Laguna Series Top Rollers are needed
for each sliding door panel. These will be placed on the Cat. No. LS104BS
Top Sliding Tube after it has been mounted to the glass panels or wall. The door
panel is then positioned and attached to the Rollers. Top Rollers will allow for
1/8 inch (3.2 millimeter) up or down adjustment for final alignment. Rollers are
supplied with both countersunk and cap fittings, so the glass fabrication choice
is yours.
Color: Brushed Stainless Steel
Minimum Order: 1 Each
System Limitations:
The following are recommended limitations for this system:
minimum panel width: 37-13/16" (960 mm)
maximum panel width: 53-9/16" (1360 mm)
maximum panel weight: 220 lbs (100 kg)
The panel height should never exceed 2.5 times the width of the panel
Maximum available length of the top track is 104" (2640 mm)