- Clamps Units Up to 4" Thick
- Heavy-Duty Steel Construction
- Aids in the Assembly of Insulating Glass Units
The CRL Hot Melt Clamp Table has heavy-duty tubular steel construction. Tubular framed clamping unit consists of a stabilizer unit in the bottom, which is a horizontal bar powered by a four inch (102 millimeter) bore x two inch (51 millimeter) stroke pneumatic cylinder actuated by a hand lever on the frame.
The clamping head has a horizontal bar lined with a one inch square (25.4 millimeter square) strip of closed cell, 40 durometer shore "A" neoprene rubber; powered by a two inch (50.8 millimeter) bore x eight inch (203.2 millimeter) stroke pneumatic cylinder actuated by a foot pedal. The stabilizing bar comes up from the bottom and the clamp head comes down from the top to secure glass and spacer along one edge for sealant application. The clamping unit must be released and the unit rotated and reclamped to seal each side.
Requires 100 psi and seven cfm air supply.
Always wear the proper protective safety gear including when handling glass. Failure to do so can result in injury.