For 3/8" or 1/2" (10 or 12 mm) Glass
The CRL PH34 Wall Mounted Transom Patch is used to support a transom from
a side jamb. It includes the INT300 Insert for mounting a door with the CRL
PH20A or PH21A Top Door Patch Fitting. The Insert can also be moved on the
non-hinged side, allowing for a double swing door. A INT306 Transom Patch Door
Stop Insert can be used to create a one way door. Also a INT305 Transom Patch
Keeper Insert can be installed for use with an AMR205 Lock when used for top of
the door installation.
Color: Duranodic Bronze
Minimum Order: 1 Each
Additional Product Information:
Glass Fabrication Required: One 3/4 inch (19 millimeter) Diameter Hole and
Corner Notch.
Important Note:
If the weight of the transom exceeds 100 pounds (45.4 kilograms) the transom
must be supported from the ceiling. This is to prevent the Patches from slipping
from too much weight.