- Available in Many Attractive Finishes
- Narrow Extrusion Face Allows Increased Mirror Visibility
- Custom Made to Your Exact Specifications
This CRL Custom Aluminum Mirror Frame is available in many attractive finishes that will match virtually any decor. The entire assembly and mounting process takes only minutes because your custom frame has been fabricated to exact specifications and tolerances. The frame ships with applicable screws which is all that is required for assembly.
The frame is fabricated so that the screw holes are on the top and bottom members of the frame (Type "B" above) or on the side members (Type "S" above). The mirror must be cut 5/16 inches (7.9 millimeters) less in width and height than the outside dimensions of the frame.Specify Frame Model
This mirror frame is not supplied with glazing vinyl. You can apply a small bead of silicone in each corner to secure mirror inside the channel.
If you would prefer a Shelf attached to your Custom Mirror Frame, you can order a D1984 Mirror Frame with Shelf.
Specify Finish Required
Specify Outside Frame Measurements (Width by Height)
Specify Screw Type
The smallest frame size is 12 by 12 inches (304.8 by 304.8 millimeters) and the largest is 24 by 36 inches (609.6 by 914.4 millimeters).