Strong Zinc Plated Steel for Large Door Installations
12' (3.66 m) Stock Lengths You Cut to Your Own Length
Easy to Install
This CRL Ball Bearing Roll-EZY Track Assembly is ideal for large door installations. This assembly is easy to install, and once installation is complete, rolls smoothly with ball-bearing operation which assures free running doors. This track assembly can easily be cut down to fit opening.
Extrusion Length: 12 ft (3.66 m)
Ship Via: No UPS - Common Carrier Only
Minimum Order: 1 Each
Each assembly contains:
One piece KV993 Upper Channel Guide
One piece KV995 Shoe for Glass Doors
One and a half pieces KV997 Ball Bearing Carrier
One piece KV999 Lower Track
1. Allow a one inch (25.4 millimeter) opening for the width of the track, and
cut glass 1-1/4 inches (32 millimeters) shorter than the height of opening.
2. The Ball Bearing Carrier (KV997) should be 2/3 the length of the opening and
then centered under the Shoe. This will provide proper rolling action for the
door since the Ball Bearing Carrier travels at 2/3 the speed of the Shoe.
3. The weight limitation for this Track Assembly is 50 lbs/ft.