Easy Application From Cartridge Tube
CRL Dap Latex Glazing is an easy-working compound for back bedding and face glazing window sash. It adheres well to wood, aluminum, steel and galvanized sash for a weathertight seal. Its smooth, consistent texture can be applied directly from the cartridge, requires no kneading and resists shrinking and cracking. 10.1 fluid ounce (300 milliliter) tube size features a unique, rectangular shaped nozzle for uniform bead. Excess glazing can be removed with soap and water before it sets. Dries to touch in two hours.
Ready to Use for Face Glazing Wood, Metal or Aluminum Window Frames
Surfaces should be clean, dry and free of frost. When re-glazing, remove all old putty and bedding using; 4500, PR9000, AK40. Smooth glazing to an angle that sheets water with a putty knife; 2BE118 , 4701 , 2S114 .
Size: 10.1 fl oz (300 ml)
Minimum Order: 1 Each
Typical dry time before required painting is three to seven days depending on temperature and relative
humidity. The white color compound can be painted with latex paint after three days. Oil-based paint may be applied after one week.
Coverage: 33 linear feet (10 meters) at 3/8 inch (9.5 millimeter) x 1/4 inch (6 millimeter) triangular cross section.
Specification: Meets ASTM Spec C-669-95.
Do not thin glazing. Do not apply when air or sash
temperatures are below 40 degrees F (4 degrees C). Do not use on plastic
windowpanes, insulating glass units with an organic seal, any windowpane over 48
inches (1,219 millimeters) in length, or metal sash with rabbets over 1-1/4 inch
(32 millimeters) wide. Also not recommended for stained/leaded glass projects.
Check can label and Specification Data Sheet for additional limitations.