For Use With 3/8" to 1/2" (10 to 12 mm) Thick
Self Closing With Hold Open at 90 Degrees
No Notches or Holes Needed in the Glass
Available in Polished Chrome and Brushed Nickel Finishes
Left and Right Handed Models Available
This combination Beretta Closer with Door Patch requires no holes or
notches in the glass, and can be installed in the floor or overhead. When used
in the floor, it can handle up to a 176 pound (80 kg) door with a maximum width
of 35-1/2" (902 mm) by 94-1/2" (2400 mm) tall. When used overhead, the maximum
weight of the door is reduced to 155 pounds (70 kg) with a maximum width of 32"
(813 mm) by 87" (2210 mm) tall. Install the Closer along with any of the Beretta
Door Patches, and simply slide your glass in, tighten the set screws and you are
done, it’s that easy!