For 3/8" or 1/2" (10 or 12 mm) Glass
This CRL Sidelite Mounted Transom Patch Connector with Reversible Door Stop
is used to connect a sidelite and transom together. It is usually used on the
strike or swinging side of the door. By simply turning the Reversible Door Stop
around, you have the choice of making the door swing in or out.
Color: Brushed Stainless
Minimum Order: 1 Each
Additional Product Information:
The connector can be used on one lite or two lite transoms, and with the stops
removed, can be used as a Connector only. When used as Connector only, it is
suggested that you turn the fitting around so the notches in the Cover Plates
face up, and are not visible.
GLASS FABRICATION REQUIRED: Three 3/4 inch (19 millimeter) Diameter Holes.