- Designed for the "All Glass" Look
- For Use with 1/2" and 5/8" Tempered Glass for Facades, 3/4" Tempered Glass for Fins
- Made of 316 Alloy Stainless Steel and Available in Brushed Stainless and Polished Stainless Finishes
|
This CRL Regular-Duty Fin Stabilized Spider Fitting can be used with 1/2 inch (12 millimeter) or 5/8 inch (16 millimeter) facade glass, 3/4 inch (19 millimeter) glass, or metal fins to stabilize the deflections associated with wind and stack load pressures, while maintaining an "all glass" look.
The Regular-Duty Fin Stabilized Spiders are an economical choice for most projects. Each Spider is supplied with the countersunk swivel glass fastening fittings. Alternate glass fasteners are available separately.
Please Note: To determine whether Regular-Duty or Heavy-Duty Spider Fittings are needed for you application, please consult local building requirements and a licensed structural engineer.
For additional assistance, contact us at .
SPECIFICATIONS:
For Use With: 1/2 to 5/8 Inch (12 to 16 millimeter) Glass, 3/4 Inch (19.1 millimeter) Tempered Glass for Fins
Glass Fabrication Required: A one inch (25.4 millimeter) diameter countersunk hole per facade glass fastening, and one 7/8 inch (22 millimeter) diameter hole per fin fastener
Templates: Available on Request for Each Fitting
Typical Applications:
Malls
Atriums
Airports
Museums
All Glass Curtainwalls