- Designed for the "All Glass" Look
- For Use with 1/2" to 3/4" Tempered Glass for Facades, 3/4" Tempered Glass for Fins
- Made of 316 Alloy Stainless Steel and Available in Brushed Stainless and Polished Stainless Finishes
This CRL Heavy-Duty Fin Stabilized Spider Fitting can be used with 1/2 inch (12 millimeter) to 3/4 inch (19 millimeter) facade glass, 3/4 inch (19 millimeter) glass, or metal fins to stabilize the deflections associated with wind and stack load pressures, while maintaining an "all glass" look.
The Heavy-Duty Fin Stabilized Spiders are an economical choice for most projects. Each Spider is supplied with the countersunk swivel glass fastening fittings. Alternate glass fasteners are available separately.Malls
Please Note: To determine whether Regular-Duty or Heavy-Duty Spider Fittings are needed for you application, please consult local building requirements and a licensed structural engineer.
For additional assistance, contact us at .
For Use With: 1/2 to 3/4 Inch (12 to 19 millimeter) Glass, 3/4 Inch (19 millimeter) Tempered Glass for Fins
Glass Fabrication Required: One 1-7/16 inch (36.5 millimeter) diameter countersunk hole per facade glass fastening, and one 7/8 inch (22 millimeter) diameter hole per fin fastener
Templates: Available on Request for Each Fitting
All Glass Curtainwalls