- Designed for the "All Glass" Look
- For Use with 1/2" and 5/8" Tempered Glass
- Made of 316 Alloy Stainless Steel and Available in Brushed Stainless and Polished Stainless Finishes
This CRL Regular Duty Fin Stabilized Spider Fitting can be used with 1/2 inch (12 millimeter) or 5/8 inch (16 millimeter) facade glass, 3/4 inch (19 millimeter) glass, or metal fins to stabilize the deflections associated with wind and stack load pressures, while maintaining an "all glass" look.
The Regular Duty Fin Stabilized Spiders are an economical choice for most projects. Each Spider is supplied with the countersunk swivel glass fastening fittings. Alternate glass fasteners are available separately.Malls
Please Note: To determine whether Regular-Duty or Heavy-Duty Spider Fittings are needed for you application, please consult local building requirements and a licensed structural engineer.
For additional assistance, contact us at .
For Use With: 1/2 to 5/8 Inch (12 to 16 millimeter) Glass
Glass Fabrication Required: A one inch (25.4 millimeter) diameter countersunk hole per facade glass fastening, and one 7/8 inch (22 millimeter) diameter hole per fin fastener
Templates: Available on Request for Each Fitting
All Glass Curtainwalls