For 3/8 to 1/2" (10 to 12 mm) Glass
CRL Square Style Hole-in-Glass Fixed Panel
U-Clamps feature sharp corners and come in a variety of finishes. One
mounting screw per clamp is included. Clearance between the glass and the wall
is 5/32 to 3/16 inch (4 to 4.8 millimeter). They perform the same function as
our Standard Square Wall Mount Clamps. The glass fabrication difference between
the two clamps is that the Standard Wall Mount requires a v-notch and the Fixed
Panel Clamp requires one hole.
Color: Brushed Bronze
Width: 2 in (51 mm)
Height: 2 in (51 mm)
Minimum Order: 1 Each
The Fixed Panel Clamp is recommended for 3/8 to
1/2 inch (10 to 12 millimeter) thick glass installations where a hole drilling
measurement of 1-1/2 inches times the glass thickness is required by the
Temperer (from the edge of the glass to the closest edge of the hole).
Requires drilling 5/8 or 3/4 inch (16 or 19 millimeter) hole.