For 5/16" to 1/2" (8 to 12 mm) Thick Glass
CRL Roman Series Fixed Panel U-Clamps are used to secure fixed panels of glass to walls, floors, and ceilings. The rounded corners give the clamp a "softer" design and creates a classy look. One mounting screw per clamp is included. They perform the same function as our Standard Fixed Panel U-Clamps. They are especially recommended for 1/2 inch (12 millimeter) thick glass installations where a hole drilling measurement of 1-1/2 inches (38.1 millimeters) times the glass thickness (from the edge of the glass to the closest edge of the hole) is required by the temperer.
Width: 1-3/4 in (44.5 mm)
Height: 1-15/16 in (49.2 mm)
Minimum Order: 1 Each
Note: Image shows front and back, although these are sold individually.
The stud that goes through the hole made in the glass is positioned further from the edge of the glass than that of the Standard U-Clamp. This makes the Oversized U-Clamp the preferred clamp of most temperers for 1/2 in (12 millimeter) thick glass
Material: Solid Brass
Glass Thickness Range: 5/16 to 1/2 Inch (8 to 12 millimeter)
Hole Diameter Required: 5/8 or 3/4 Inch (16 or 19 millimeter) Each Panel
Includes: Gaskets and Mounting Screws
Note: An Additional Set of Gaskets is Required for 5/16 Inch (8 millimeter) Glass