Oversize Item ships at
To reduce shipping charge this item can be cut.
Call 888-663-9830 with the cutting instructions.
Enclosure Not Going to Ceiling
The CRL Deluxe Header Kit will provide additional support and a level of
safety while securing glass panels not reaching the ceiling. Deluxe Header Kits
are designed to allow installers to do in-house fabrication using a selection of
Snap-in Filler Insert for Door Pocket Included
Available in Several Beautiful Finishes
New, Contoured Design to Rounded Side of Header Provides Sleeker Appearance
Sold in 66, 98 and 144 inch (1676, 2489 and 3657 millimeter)
lengths, the double profile extrusion has a narrow 1-1/4 inch (31.8 millimeter)
face to minimize the visible sight line. A choice of facing edges (round or flat
with mitered edges) is possible by simply reversing the extrusion.
90º, 135º or
Adjustable Corners are sold separately.
Also Available is a special Adapter
Block for use on pivot hinge installations.
A 2-1/4 inch (57.2 millimeter)
Mounting Bracket is offered for installations when the Header does not meet the
wall at 90º, and the standard Wall Mounting Brackets cannot be used. Header is
constructed of aluminum alloy 6463.
This Header Kit is adaptable to
Prima Hinges, Senior Cardiff or
Pivot Mount Hinges. Junior Prima Hinges should be used with the
Color: Antique Brushed Nickel
Length: 98 in (2.49 m)
Minimum Order: 1 Each
Kit Consists Of:
One 66, 98 or 144 Inch (1676, 2489 and 3657 millimeter) Header Extrusion (one
round and flat side)
One 36 Inch (914 millimeter) Piece Snap-In Filler for Door Pocket (trim to size)
Vinyl for 5/16 and 3/8 Inch (8 and 10 millimeter) Glass (not required for 1/2
inch (12 millimeter)
One Set of
SHB100 Aluminum Wall Mounting Brackets