For 3/8" or 1/2" (10 or 12 mm) Glass
This CRL Transom Mounted Patch Connector with Support Fin Bracket is used
on one or two lite transoms that require additional lateral support to achieve
the desired structural strength. The support fin glass should be sized to
approved design criteria (refer to GANA or Manufacturer's Manual), and secured
to the ceiling with a PH92 Ceiling Mounted Support Fin Bracket.
Minimum Order: 1 Each
Additional Product Information:
GLASS FABRICATION REQUIRED: Four 3/4 inch (19 millimeter) Diameter Holes.