Longer 3/4" Spindle Required for Use with Patch
Fittings and Rail Hardware
A.D.A. Compliant 8.5 Pound Exterior Opening Force Suitable for Doors up to 36"
(914 mm) Wide
Door Closers Cross Reference Chart
CRL Overhead Concealed Door Closer for Patch
Fittings and Door Rails have a longer spindle (approximately 3/4 in (19
millimeter)), the preferred length when used in conjunction with Patch Hardware
Fittings. The closer has dual action valves for closing operation (one valve for
closing, one valve for latching). 90º and 105º Hold Open and Non Hold-Open
models are available. Interchangeable with International, Jackson and similar
brands of Overhead Concealed Door Closers.
Closer Body Length: 11-5/8 in (295 mm)
Closer Body Width: 3-11/16 in (94 mm)
Additional Product Information:
Door Closer Body comes packaged with Mounting Clips and Instructions.
NOTE: Although this closer is designed to meet ADA barrier-free opening force
requirements, adequate closing force may not be obtained due to varying site
conditions and door size.
This Door Closer is not to be used for doors weighing in
excess of 200 Lbs. (91 Kg) or wider than 36" (914 mm).