Super Adhesive, High Bonding Strength Tape Can Replace Rivets, Screws, Spot Welds and Liquid Adhesives
Bonds to Many Substrates
Can be used for Interior or Exterior Industrial Applications
CRL 3M® VHB Tape can replace mechanical fasteners such as rivets, spot welds, screws, and liquid adhesives. These and other fasteners have all been successfully replaced in various manufacturing uses by VHB Tape. It bonds too many substrates, and can be used for interior or exterior industrial applications. VHB Tape eliminates drilling for mechanical fasteners, and mixing of liquid adhesives. It applies neatly and easily, conforms to irregular surfaces, and allows concealment in use.
Excellent resistance to ultraviolet light, solvents, moisture and plasticizer migration.
Thickness of Tape: 3/64 in (1.1 mm) .045 in
Width of Tape: 1/2 in (13 mm)
Feet per Roll: 108 ft (33 m)
Additional Product Information:
Best adhesion is achieved when applied at temperatures above 70 degrees Fahrenheit (16 degrees Celsius) with adequate initial hand or roller pressure. Also, when surfaces are cleaned with a solution of isopropyl alcohol and water. CRL 3M® VHB Tape achieves 50 percent strength in 20 minutes, 90 percent strength in 24 hours and full strength in 72 hours.
Foam: Closed cell acrylic
Release liner: paper
Thickness: .045 inch (1.1 millimeter)
Peel Adhesion to stainless steel: Excellent - 25 lb. /in.
Tensile Adhesion to aluminum: Very good - 140 psi
Dynamic Shear Adhesion to stainless steel: Good - 80 psi
Static Shear Adhesion:
At Room Temperature - Very good
At 200 degrees Fahrenheit (93 degrees Celsius) - Good