Keeps Glass Fragments from Causing Serious Bodily Damage Should Mirror be Accidentally Broken
Easy to Apply and Ready to Use
Meets Specification 16 CFR1201 Impact Resistance
This pressure-sensitive, adhesive coated film tape is primarily recommended for mirrored Wardrobe (Closet) doors that require a CRL Category II Mirror Safety Backing. A woven scrim imbedded into the film for high tensile and impact strength also prevents moisture entrapment and scrim de-lamination. The high performance adhesive allows for easy roll unwind, yet promotes high bond to a wide variety of mirror backings. No failure when tested for impact resistance to 16 CFR1201.
Width of Tape: 36 in (914 mm)
Linear Feet per Roll: 600 ft (183 m)
Thickness: 5 mil
Minimum Order: 1 Roll
Additional Product Information:
Tensile Strength (PSI): 6
Thickness: 4.5 mil (.0045" - .006")
Adhesive: Acrylic water based
Peel Adhesion: *18 oz.
*"PSTC-1" initial tack on stainless steel.
Application Instructions: For best results, tape should be applied with pressure roller application. Surface should be clean and free of oil and moisture. Apply at temperatures between 60 and 100 degrees Fahrenheit (16 and 38 degrees Celsius).