- For Use With 3/8" and 1/2" Glass
- 1" (25 mm) Diameter Stainless Steel or Brass Tubing
- Available in Several Architectural Finishes
This CRL Glass Mounted Offset Pull Handle is available in three finishes.
Specifications:CD12X12 or CD18X18 Pull Handles (Back to Back Mounting)
Two Each Through Bolts for Glass Mounting
Four Each 1-1/4 Inch (32 millimeter) Diameter Matching Finish Metal Washers and Gaskets
For Use With:
3/8 Inch (10 millimeter) Glass
1/2 Inch (12 millimeter) Glass
One Inch (25 millimeter) Diameter Stainless Steel or Brass Tubing
Glass Fabrication Required:
Two 5/8 Inch (16 millimeter) Diameter Holes
CD12X12 12 Inches (305 millimeter) Center-to-Center
CD18X18 18 Inches (457 millimeter) Center-to-Center
For the thicker doors, please, use TB4CH bolt, which permits mounting of pulls to 1-3/4" (44.5 mm) thick, and in majority cases even up to 2" thick, aluminum, wood or hollow metal doors.