Clear, Reliable, Hands-Free Two-Way Conversation
Standard Unit Fits Barriers From 1/4" to 4" Thick
Bullet Resistant Models Available in Level 1 and Level 3
CRL Thru-Glass Two-Way Digital Electronic Communicators contain the latest
advancements in electronic sound transmission devices. Clear, distortion free two-way
conversations can take place through secure barriers as the unit senses volume levels
and automatically activates when speech begins. Easy to operate multi-function controls
can easily be set by the clerk to turn the Communicator on and off, set to mute, use the
'wake-up' mode, and to adjust volume.
An industry first, the
CRL Thru-Glass Two-Way Digital Electronic Communicator can
be used by the clerk with an optional Gooseneck Microphone with USB plugs, one of the
three Headsets shown on page G458, or when ideal conditions exist, simply by speaking
into the Communicator's built-in microphone.
Select either the 120V AC Plug-In Transformer model, or the 12V DC Rechargeable
Battery Powered model. Units are available as standard or bullet resistant models in
satin or black anodized finishes. CRL Digital Communicators are easy to install. The
absence of exterior screws or fasteners make them tamper-resistant. All units are
supplied complete with mounting hardware and instructions to fit 1/4" to 1/2" (6 to 12
mm) thick barrier glass, and up to a 4" (102 mm) barrier when using the supplied
extension screws and mounting brackets.
Color: Black Anodized
Materials: 1/8" (3.2 mm) Thick, Tempered Aluminum Case
Finishes: Satin Anodized, Black Anodized
Dimensions: Interior: 4" (102 mm) Diameter x 3-11/16" (94 mm) Deep.
Exterior: 4" (102 mm) Diameter x 1-3/8" (35 mm) Deep
Barrier/Glazing Range: 1/4" to 1/2" (6 to 12 mm) With Standard
Installation Kit; Up to 4" (102 mm) Using Extension Screws
Power Requirement: 10 to 12V AC, 1500mA Nominal
Power Supply/Charger: Input 120V AC; Output 12V DC
Controls: Inside and Outside Volume; Mute
Battery Type: TT12N2A NIMH 2000MAH (2 Amp)
Duty Time – Per Charge: >30 Hours Per Charge
Charge Time: 4 Hours; Can Be Used While Charging
Glass Fabrication Required: Single 7/16" to 3-1/2"
(11 to 89 mm) Hole Cut-Out
Frequency Response: 50Hz to 12kHz
Distortion: THD+N<1% (Typical .05 to .09%)
Talk Mode: Full-Duplex (Continuous Two-Way Speech)
Signal to Noise Ratio: >55dB (Typical 58dB)
Bullet Resistant Option: Level 1 and Level 3