Automatic, Non-Handed, Reversible
Ideal for Use With Carpeted Interiors
Commercial Medium-Duty Automatic Door Bottom is a mechanically actuated
An internal carrier bar with a vinyl insert drops from a concealed cavity to
form a tight seal between the base of the door and the threshold preventing
dust, moisture and wind from entering.
It is ideal for use where carpeted interiors require the door bottom to retract
when the door is opened.
Pemko Automatic Door Bottoms consist of an aluminum case which surrounds a movable drop bar seal. The drop bar seal is actuated by a plunger which contacts the jamb as the door is closing, forcing the drop bar seal down against the floor or threshold.
Automatic Door bottoms are frequently used when an automatic door bottom is required to close over carpet.
Pemko Automatic Door Bottoms provides low closing force
and excellent seals to keep out draft, dust, moisture, insects, fumes, light and sound.
Supplied with a frame "actuator" protector plate, the door bottom is field
reversible for either "hand" of door, and may be field cut to a maximum of two
inches (50.8) millimeters. Cut from end opposite actuating plunger only.
Color: Aluminum Finish
Length: 48-1/2 in (1232 mm)
It is sized for a 4 ft (1219 mm) opening with an overall size of 48-1/2 in (1232 mm)