|
|
|
HOME » Standoffs, Display Systems and Hardware » GFR Standoff, Cable, and Rod Display and Shelving Systems » GFR Standoff and Gripper Systems »
|
|
|
|
|
|
|
13 Products listed.
Our Price: $8.02
Part No:GSO-A14H-125
|
Our Price: $9.72
Part No:GSO-A14H-250
|
Our Price: $10.00
Part No:GSO-A14H-375
|
Our Price: $10.29
Part No:GSO-A14H-500
|
Special Order
Part No:GSL-4WH1
|
Our Price: $8.22
Part No:GSO-A24H-125
|
Our Price: $10.00
Part No:GSO-A24H-250
|
Our Price: $10.29
Part No:GSO-A24H-375
|
Our Price: $10.57
Part No:GSO-A24H-500
|
Special Order
Part No:GSL-4WH2
|
Our Price: $15.61
Part No:GSO-ST
|
Our Price: $14.68
Part No:GSO-TRAV
|
|
|
Downloadable Installation Instructions for Standoff Hubs
How to: Installing Standoff Hubs |
|
To install a standoff hub, first select the proper length. A quote must be obtained for some hubs, such as our GSL-4WH1 and GSL-4WH2. After selecting the proper hub length, select a threaded rod for standoffs, generally 1/2"-3/4" longer than the hub. |
|
Screw the threaded rod for standoffs into the Standoff Hub mounting plate, or a standoff base, after the plate or standoff base is mounted to the wall, and slide the standoff hub over the rod. |
|
Set your panel on the standoff hub's notch, and screw on a standoff cap to hold it all in place. |
Downloadable Installation Instructions for Standoff Links and Travelers
How to: Installing Standoff Traveler and Links
Use Traveler's and Links with our Standoff series Hinges to create rotating displays.
|
|
Using our Standoff Traveler's, Standoff Links, and Standoff Hinges, creating rotating displays is easy. First, feed a Traveler (GSO-ST or GSO-TRAV) onto your rod. |
|
Attach a Standoff Link (GSO-LINKL or GSO-LINKT) to the Traveler. The Link allows for mounting of a hinge. |
|
Once the Standoff Hinge is mounted to the Link, it can rotate freely, and panels can be attached to the Hinges. |
|
|
|
|