TechnologyLK.com - Wide range of quality window film products, shower door parts, shower door seal, diamond drill bit, drill glass, glass drill bit, standoff system, dome mirror, security mirror and more
 
Product Search
Search
Shop By Category
Abrasive and Diamond Belts and Discs
Architectural and Ornamental Systems and Accessories
Automotive Products
Bargain Bin - Weekly Special
CDS Saw Blades and Drill Bits for Concrete and Stone
Cleaning Products and Lubricants
Closet Doors and Drawer Hardware
Commercial Door and Window Hardware
Construction Sealants, Silicones Sealants, Glazing Tapes, Tools, and Adhesives
Convex, Dome Security and Inspection Mirrors
Corrosion Prevention and Protection
Craft, Hobby and Gift Ideas
Decorative Venetian Art Cast Glass Plates, Platters and Bowls
Displays, Catalogs, Videos, and Manuals
Door Closers and Accessories
Drill Bits for Marble, Granite, Porcelain, and Masonry
European Style Sliding and Pivot Glass Doors and Hardware
Extrusions, Channels, and Moldings
First Aid Products, Safety, and Protective Wear and Equipment
Glass Cabinet and Showcase Hardware
Glass Connectors and Clamps
Glass Shelf Kits, Supports, Clamps and Brackets
Glass, Plastic, Gasket, and Tube Cutting Tools, Fabrication Machinery, and Related Items
Glazing Knives, Points, Clips, Removers and Putty
Hand and Power Tools, Equipment, and Accessories
Hilti Power Tools and Accessories
Lapping and Polishing Compounds and Pastes
Makeup Mirrors, Vanity Mirrors, and Lamps
Mirror Frames, Mounting Hardware, Channels, and Supplies
Outlet Covers, Grills, and Accessories
Paint
Restaurant and Hospitality Products
Security Hardware
Showcase Assemblies, Parts, and Hardware
Shower and Tub Enclosure Hardware, Kits and Accessories
Showers, Vanities and Shower Columns by Dreamline
Soldering, Welding and Supplies
Standoffs, Display Systems and Hardware
Transaction and Commercial Hardware
UV Lamps, Dispensers, Kits, and Fast Curing Adhesives
Weatherstripping and Glazing Vinyls
Window and Door Hardware
Window Film and Solar Screen
HOME » 

Bargain Bin - Weekly Special

Viewer  How to remove light scratches with Cerium Oxide

Buy of the month - Cerium Oxide Powder.

Take an additional 15% off the web’s lowest prices on Cerium Oxide, the compound the professionals use to polish and restore glass. 

Purchase any item shown below and enter the CODE: CERIUM15 at checkout to receive 15% discount.

9 Products listed.

«« «
Page 1 of 1
» »»
Our Price: $26.95

Part No:CO557901

«« «
Page 1 of 1
» »»

How to remove light scratches and stains with Cerium Oxide

MATERIALS
• Cerium Oxide powder (sold in quantities of 8 ounces and up)
• Two plastic tubs, pint or quart-sized
• Water
• Lint-free cloths or paper towels
• A 3” inch felt polishing wheel that attaches to an electric or rechargeable drill.

PROCEDURE
• Fill one of the tubs, about half full, with water and place the felt polishing wheel into the water to get it damp while you mix your polishing compound
• Place about two tablespoons of the cerium oxide into the other tub and add a small splash of water
• Use a small rod or stick to stir the mixture until the powder dissolves in the water. You’ll want to end up with a slurry that’s about the consistency of heavy cream. Keep stirring and adding small amounts of water until you reach the right consistency, which you can check with your finger.
• Make sure the glass is clean before you start and dampen it thoroughly with a clean lint-free towel.
• Check your felt polishing wheel. You want it damp, but not dripping wet.
• Attach the wheel to your electric or cordless drill and dip it lightly into the polishing slurry. Let any excess drip off into the tub.
• Buff the scratched area, starting slowly at first, then increasing the speed. Keep the felt polishing wheel moving from side to side at all times and use moderate pressure. Eventually, a dry film will form over the scratched area as you work. Stop buffing before the film is completely dry.

CAUTION:
• When the slurry is almost dry, be careful. Buffing dry glass can overheat it and it could crack. So don’t overdo it. Always be sure the surface is sufficiently damp when you are working on it.
• When the slurry is dry, just wipe it off.
• You can repeat the process if any scratches or stains are still visible.

If you have leftover compound, simply cover the tub to store it. When the slurry dries out, it can be reused simply by adding water.
 

My Account
Create New Account
(simplify checkout,
view order status,
save shipping info,
track recent orders)
Sign In to Your Account
Home |  About Us |  Terms and Conditions |  Return Policy |  Contact Us |  Product Catalog |  Account Login |  RMA Form |  Order Status |  Wishlist
Online Payment Service
SecurityMetrics Credit Card Safe technologylk.com Coupons on tjoos.com LK Technologies is an Upfront Merchant on TheFind. Click for info. Like us at Gordon Glass Company Follow GordonGlass on Twitter Check out GordonGlass on Youtube! Check out GordonGlass on MySpace!
Copyright ©2014 LK Technology, Inc. All Rights Reserved. Privacy Statement