For Indoor Use Only.
Caution Stripes Around Border.
Pedestrian Walkways and Parking Garages.
Second Surface Screen Printing in Black
The Safety Border Convex Mirror offers 160°
viewing. The caution stripes on the border immediately draws attention to the
mirror providing additional safety at corner and “T” intersections.
Strategically position these mirrors at aisles and outside corners
to prevent accidents at blind spots.
Distance covered up to 40 ft.
Additional Product Information:
Ships with mounting hardware, installation instructions.
Installation hardware includes one Telescopic Bracket.
1. Make sure the bracket is assembled as shown In
the diagrams above.
2. Loosen the Hex Head Bolts holding the Ball Stud
Locking Plate; position the washer on the end of the Ball Stud, and screw
it into the hole on the Mirror back plate. (Secure it tightly with pliers
or vice grips).
3. Loosen the screw on the Locking Collar
and slide the Inside (telescoping) Bracket Post in or out to the desired
position. Make sure the Screw aligns with the hole in the Outside Bracket Post
and tighten to hold the post in place (Note: Shorter bracket positions are
possible by cutting the Inside Bracket Post with a hacksaw).
4. Arrange the mirror and bracket to the
desired position, and Tighten All of the Hex Bolts to Secure.
5. All Mirrors should be securely mounted
to wood or metal substrates, and should not be mounted to drywall without
additional support. (Hardware depends on wall surface) Fasteners are not